Consolidated Statutes and Regulations
Consolidated Statutes
Consolidated Regulations
Annual Statutes and Regulations
Annual Statutes
Annual Regulations
Additional information
Québec Official Publisher
What’s new?
Information note
Policy of the Minister of Justice
Laws: Amendments
Laws: Provisions not in force
Laws: Provisions brought into force
Annual Statutes: PDF versions since 1996
Regulations: Amendments
Annual Regulations: PDF versions since 1996
Court Decisions
C-24.2, r. 4 - Ministerial Order concerning the approval of weigh scales
Section 15.3
Disposition versions
15.3. In order to weigh a category of axle, the operator shall:
(1) have the road vehicle or combination of road vehicles move forward so that each of the wheels of a category of axle is supported by the wheel-load scale;
(2) have the road vehicle or combination of road vehicles come to a complete stop;
(3) take the reading of the weight on the dial or display of each wheel-load scale.
The operator may also weigh a category of axle in accordance with the manufacturer’s instructions.
The total loaded weight of a road vehicle or combination of road vehicles shall be determined by the sum of the weight readings for each of the wheels of an axle category supported by the wheel-load scale.
The total loaded weight of a road vehicle or combination of road vehicles shall be determined by the sum of the axle loads.
15.3. In order to weigh a category of axle, the operator shall:
(1) have the road vehicle or combination of road vehicles move forward so that each of the wheels of a category of axle is supported by the wheel-load scale;
(2) have the road vehicle or combination of road vehicles come to a complete stop;
(3) take the reading of the weight on the dial or display of each wheel-load scale.
The total loaded weight of a road vehicle or combination of road vehicles shall be determined by the sum of the weight readings for each of the wheels of an axle category supported by the wheel-load scale.
The total loaded weight of a road vehicle or combination of road vehicles shall be determined by the sum of the axle loads.
